Printable Version of Topic
Click here to view this topic in its original format
Forums > Глюкодром > а чо та EAC перестал видеть CDдрайверы, к чему бы это.


Posted by: sanbo on 30-05-2003, 23:43
говорит, нету там никакого музукального диска и все... хоть тресни...

чо это с ним?

Posted by: Dikochka on 30-05-2003, 23:54
мы там в "как сделать копию СД" это обсуждаем sad.gif

Posted by: LF_ on 01-06-2003, 04:44
1. Check you previous installation

* run ASPICHK (included in the aspi_v471.exe )
* if WOWPOST.EXE or WINASPI.DLL show up and you are running winXP then search
for those files in your windows directory (inc subdirs and hidden files)
and DELETE them they are not needed for aspi on XP.


2. install ASPI 4.71 ( or later ) from adaptec

http://www.adaptec.com/worldwide/support/ (http://www.adaptec.com/worldwide/support/
drivers_by_product.html?sess=no&cat=%2fProduct%2fASPI-4.70&prodkey=ASPI-4.70

Use the INSTALL.BAT to install after unzipping to make sure the
correct files only are installed.



3. Windows NT/2K/XP MUST have these reg keys added if they aren't allready,
otherwise some apps ( EAC, audiocatalyst, CDRWIN )wont show any aspi devices at all :



[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ASPI32\Parameters]
"ExcludeMiniports"=""

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ASPI32]
"ErrorControl"=dword:00000001
"Start"=dword:00000002
"Type"=dword:00000001


double click the included .reg file to add these if you are not
experienced editing the registry, as the adaptec installer
currently doesn't set all of these up, this is the source
of everyones problems.

4. reboot.


This has worked on EVERY XP/2K box I've tried
but, if it still doesn't work, try changing "Start"=dword:00000002
to "Start"=dword:00000001 in the .reg file then run it again,
and then reboot.


Yakumo
www.clan-unreal.com

Posted by: satir on 01-06-2003, 09:15
К сожалению, адаптековские ссылки не работают-очень давно сдохли sad.gif
Взять можно здесь (http://www.afterdawn.com/software/cdr_software/cdr_tools/aspi.cfm
Версию более позднюю (а2) пока не рекомендую- wink.gif были там глюки


Posted by: sanbo on 01-06-2003, 10:30
а где EAC сохраняет свои настройки, куда копируются про запуске системные файлы. не могу найти . когда запускаешь exe и настраиваешь она же не спрашивает ни о каких директориях. и при переустановке вылезает сразу же интерфейс, и можно как угодно настраивать история не меняется.

может в регистрах поискать. попробуем...

Posted by: sanbo on 01-06-2003, 11:18
получилось. шаз митьков подкину smile.gif smile.gif smile.gif


Posted by: ozlobin on 06-06-2003, 16:40
Столкнулся с аналогичной проблемой. EAC определял мой "виртуальный" сидюк от daemon tools и всё. А мой CD-RW Mutsumi как в Лету канул.
После анинстала daemon-а и перезагрузки всё заработало как ни странно smile.gif

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)